IEK
RSS Русский English Казахский Español Feedback Sitemap
Products catalog
Pricelist

04.04.07 Distribution boxes RBD

  • Description
  • Assortment
  • Design
    features
  • Package bundle
04.04.07 Distribution boxes RBD
RBD distribution terminal blocks are designed for use as terminal clamps when multiple smaller conductors must be connected to a conductor with bigger cross-section, for arrangement of distribution systems in cabinets, arrangement of main earthing busbar. Intended for installation on DIN rail or mounting panel both in power supply cabinets and flat distribution boards, working in the systems of voltages up to 1000V and frequency 50Hz, at ambient air temperature from -40 to +70°C. RBD distribution terminal blocks are made from high-quality brass with special protective coating. The body is made from non-combustible plastic. Installation methods: - on DIN rail 35mm wide; - on the board panel using 2 screws.
Sorting: article name
Total: 8
Блок распред. проходн. РБДп-35 125/50А DIN 1х35-4х6мм2 IEK
Блок распред. проходн. РБДп-35 125/50А DIN 1х35-4х6мм2 IEK
YRB30-1-125
Width: 43.0 mm
Depth: 40.5 mm
Nominal current: 125/50 A
Nominal voltage: 660 V
Блок распред. проходн. РБДп-95 232/100А DIN 1х95-4х16мм2 IEK
Блок распред. проходн. РБДп-95 232/100А DIN 1х95-4х16мм2 IEK
YRB30-1-232
Height: 71.2 mm
Width: 51.5 mm
Depth: 60.0 mm
Nominal current: 125/50 A
Distribution block for DIN-rail RBD-125A
Distribution block for DIN-rail RBD-125A
RBD-125
Height: 70.5 mm
Width: 29.0 mm
Depth: 47.0 mm
Nominal current: 125 A
Distribution block for DIN-rail RBD-160A
Distribution block for DIN-rail RBD-160A
RBD-160
Height: 70.5 mm
Width: 29.0 mm
Depth: 47.0 mm
Nominal current: 160 A
Distribution block for DIN-rail RBD-250A
Distribution block for DIN-rail RBD-250A
RBD-250
Height: 96.0 mm
Width: 48.0 mm
Depth: 51.0 mm
Nominal current: 250 A
Distribution block for DIN-rail RBD-400A
Distribution block for DIN-rail RBD-400A
RBD-400
Height: 96.0 mm
Width: 48.0 mm
Depth: 51.0 mm
Nominal current: 400 A
Distribution block for DIN-rail RBD-500A
Distribution block for DIN-rail RBD-500A
RBD-500
Height: 96.0 mm
Width: 48.0 mm
Depth: 51.0 mm
Nominal current: 500 A
Distribution block for DIN-rail RBD-80A
Distribution block for DIN-rail RBD-80A
RBD-80
Height: 66.0 mm
Width: 29.0 mm
Depth: 46.5 mm
Nominal current: 80 A
Total: 8
1
x
Search by parameters
Height mm
Width mm
Depth mm
Nominal current A
Nominal voltage V
Макс среднекрадратичный кратковрем ток Icw kA
Номин выдерживаемый импульсный ток Ipk kA
Сечение подкл проводников на входe mm²
Сечение подкл проводников на выходe mm²
Ambient temperature °C
Ability to create a large number of connection points for branch lines. Also, the blocks can be connected in a row, increasing the rigidity and quality of the entire assembly.
Ability to create a large number of connection points for branch lines. Also, the blocks can be connected in a row, increasing the rigidity and quality of the entire assembly.
Convenient mounting on a DIN rail or on a mounting plate.
Convenient mounting on a DIN rail or on a mounting plate.
The casing is made of a polyamide not supporting combustion (glow wire test at 960°C).
The casing is made of a polyamide not supporting combustion (glow wire test at 960°C).
The design is a step-shaped monolithic block enclosed in an insulated casing.
The design is a step-shaped monolithic block enclosed in an insulated casing.
The transparent front cover for visual inspection and protection against contact with live parts is additionally equipped with protrusions for holding the clamping screw.
The transparent front cover for visual inspection and protection against contact with live parts is additionally equipped with protrusions for holding the clamping screw.
Contact us Contact us:
+7 (495) 542 22 22
 
sales@iekgroup.com
Copyright © 1999-2021 IEK. ALL RIGHTS RESERVED.